BABY MONSTERS Fresh2.0, Руководство пользователя

Страница: 12 / 16

A.Open the stroller
Remove all packageing materials lay chassis on floor as shown.
Open the stroller's operating instruction, release the storage hook(A) and
rotate the stroller until you hear
〝
click
〞
sound.
Step down base lock until frame securely clicks.
B.Fitting the front wheels
Insert the front wheels into the wheel housing as shown.
Press release button and attach the front wheel.
Pull to make sure they are fully located.
To release press button and remove.
C.Fitting the rear wheels
Assemble the rear wheels as shown.
Press release button and attach the rear wheel.
Pull to make sure they are fully located.
To release press button and remove.
D.Attaching the canopy
Fix the canopy by hooking the retainer on both side of hole,Insert firmly into place.
E.Attaching the bumper bar
Insert the front bumper bar firmly into place.
Remove the bumper bar
Press the spring then pull the front bumper bar out to remove it.
WARNING! To avoid child biting the foam ,
please DON'T remove the fabric cover from front bumper bar.
F.Attaching the seat unit
Assemble the seat by inserting into holder on two side.Push until adaptors click securely into place.
Pull to make sure they are fully located.
G.Securing your child
WARNING. Ensure your child wears a correctly fitting harness at all times.
To fasten, insert both fasteners securely into the clasp adjust each strap length with buckle.
To release,press the fastener prongs and pull apart.
You child should be securely harness at all times and should never be left unattached.
WARNING: Always use the crotch strap in combination with the waist belt.
H.Using the brake
Step down the brake to stop the stroller.
Gently push the stroller to check the brake is applied.
Lift up the to release the brake.
I.Lock /swivel the front wheel
Lift up the snap locks to swivel.
Push down the snap locks to go straight lift up.
J.Adjusting the handle
Adjustable handle: press both sides of button (1) to adjust the handle height(2).
There are three different height of handle for you to choice.
K.Adjusting the footrest
To adjust the footrest ,press the buttons on either side and rotate as required.
L.Reclining the se sing at unit
Pull the lever bar gently in an upwards direction and recline the seat unit as required.
M.adjusting the front part of canopy
Adjust the canopy to the position as required.
N.reversing the seat unit
Push the buttons inwards as shown each side and lift the seat unit away from the frame.
Turn the seat unit around and replace into adaptors until you hear a
〝
click
〞
.
Pull to make sure they are fully located.
O.baby facing forward folding
1. Move the second lock position.
2. Pull the lever bar gently on both side and pull in an upwards.
3. Push the handle downwards to right position.
4. Use the folding latch.
P.baby facing parents folding
1. Move the second lock position.
2. Pull the lever bar gently on both side and pull in an upwards.
3. Push the handle downwards to right position.
4. Adjust the seat recline and hood forward.
5. Use the folding latch
.
Q.Assemble the carry cot
Take the carry cot out of the carton box.
To attach the carry cot simply pull out the two side clamps and the middle support bar and place the
carry cot in the middle of the frame so that eachmetal pin fits and clips in correctly to the openings
on each side of the frame.
To adjust the hood simply push the button locatedon the left front side of the hood and simply push
back or forward to your desired position.
Slide the foot cover over the front of the front of the carry cot and securely attach each press studs to
those on the hood section.
The hood section on the front can also be used as a carry handle make sure to only carry the basinet from
the handle part and no other section lf the hood.
R.Link with stroller
At the front of the seat near the frame on each side there is a black button.
Push the left button in first then push in the right side button and lift the seat from the frame. Put seat away.
Take the support bar and recline out so that you can attach it to the top part of the basket ,make sure it
clicks into place before proceeding.
S.Fitting the car seat
The matching car seat is fitted to the chassis by using the baby monsters car seat adaptors.
The car seat can not be attached to the chassis until the seat unit or the carry cot has been removed.
Insert the car seat adaptors into the chassis attachment device, push down on the adaptors until they click
and lock into position. Hold the car.
seat by the carry handle and lower the car seat onto the car seat adaptors.
Push the car seat down firmly until the car seat clicks and locks into position.
Check that the Car Seat is secure and locked by pulling up on the car seat handle.
T.Remove the car seat
To remove the car seat from the chassis press down on the two buttons on the sides of the
chassis attachment device (not the handle adjustment buttons where the handle turns) and lift the car seat
away from the chassis.
To remove the adaptors on the chassis pull up on the recessed handles and lift the adaptors
away from the attachment device.
Read these instructions carefully before use and keep them for future reference.
Your child’s safety may be affected if you do not follow these instructions
1. WARNING: A child’s safety is your responsibility
2. WARNING It may be dangerous to leave your child unattended.
3. WARNING Ensure that all locking devices are engaged before use.
4. WARNING Do not use a mattress thicker than 35mm
5. This vehicle is intended for children from birth to a maximum weight of 15kg.
Age and weight usage: Pram body/carrycot 0 to 9kg, car seat 0 to 13kg.
6. It is important that any person intending to use this vehicle fully understands the instructions.
7. WARNING Use a harness as soon as your child can sit unaided.
8. Never overload the vehicle; the weight limit for the shopping basket is 3 kg.
9. This vehicle has been designed for one child,
do not attempt to carry more than one child in this vehicle.
10. WARNING: Incorrect assembly, folding or use of this vehicle may cause damage
and affect the safety of the vehicle.
11. Do not use accessories that are not approved by the manufacturer.
12. WARNING Any load attached to the handle affects the stability of the pushchair.
13. WARNING Always use the crotch strap in combination with the waist belt.
14. WARNING: Never leave the vehicle without first engaging the parking device.
Avoid uphill or downhill parking.
15. WARNING Check that the pram body or seat unit attachment devices
are correctly engaged before use.
16. Do not use the vehicle on steps, stairs or escalators
as it may bedangerous to your child/children.
17.WARNING This product is not suitable for running or skating
18.Check on a regular basis to make sure that all essential components & locking devices
are functioning correctly.
19.Do not use replacement parts other than those supplied by the manufacturer or distributor.
20.WARNING! To avoid injury ensure that your child is kept away
when unfolding and folding this product.
Link with car seat(opcional)
WARNING!
21.WARNING! Do not let your child play with this product.
22.All references to Left and Right are given from the perspective of
a person standing in the pushing position.
Regularly check screws, rivets, bolts & fastenings to ensure they are locked tight
and secure. Replace any parts in an inferior condition. Should you intend to use
the pushchair during the winter, by the sea or off-road; it is important to clean
thoroughly & dry the vehicle after use. Salt from the ocean or from roads will
corrode metal parts unless removed. After use in these circumstances clean with
fresh water and thoroughly dry after use.
● Check on a regular basis that all chassis locking devices are working correctly.
● If any part of the pushchair is damaged contact your local baby monsters retailer immediately
without using the pushchair.
● Do not expose your pushchair to excessive sunlight for extensive periods of time,
even normal exposure to sunlight may cause the colour of the fabric to change.
● Take care not to tear the fabrics while transporting the pushchair.
● Light oil or silicone spray is suitable to use as a lubricant for moving parts.
Petroleum jelly is a good lubricant to use on the front axle stubs.
Periodically remove the front swivel wheel units clean and lubricate with petroleum jelly.
● Ensure that zips are either fully open or fully closed or they may be damaged.
● Always use the rain cover in inclement weather.
● Do not place items on the hood/canopy, it may damage the vehicle and/or render it unsafe.
● Always stand the stroller on a protective surface indoors.
● Routinely clean the metal parts with a damp cloth & then dry immediately
● Fabrics should be cleaned following the guidance on the care labels.
● Do not wash in the washing machine. Sponge clean or hand wash with mild detergent
and warm water (30°C)
English