Baby Lock Vesta BLMVE Скачать руководство пользователя | Manualshive

Страница: 9 / 132

background image

7

Make sure you use a router or firewall when connecting
your machine to the Internet to protect it against
unauthorized access from the Internet.

Any trade names and product names of companies appearing on
Baby Lock products, related documents and any other materials are
all trademarks or registered trademarks of those respective
companies.

This product includes software developed by the following
vendor:
©2008 Devicescape Software, Inc.

PRECAUTION FOR WIRELESS
CONNECTION

TRADEMARKS

IMPORTANT:

READ BEFORE DOWNLOADING, COPYING,
INSTALLING OR USING.
By downloading, copying, installing or using the
software you agree to this license. If you do not
agree to this license, do not download, install,
copy or use the software.

Intel License Agreement For Open
Source Computer Vision Library

Copyright © 2000, Intel Corporation, all rights reserved. Third party
copyrights are property of their respective owners.

Redistribution and use in source and binary forms,
with or without modification, are permitted provided
that the following conditions are met:
• Redistribution’s of source code must retain the

above copyright notice, this list of conditions and
the following disclaimer.

• Redistribution’s in binary form must reproduce the

above copyright notice, this list of conditions and
the following disclaimer in the documentation and/
or other materials provided with the distribution.

• The name of Intel Corporation may not be used to

endorse or promote products derived from this
software without specific prior written permission.

This software is provided by the copyright holders and
contributors “as is” and any express or implied
warranties, including, but not limited to, the implied
warranties of merchantability and fitness for a
particular purpose are disclaimed. In no event shall
Intel or contributors be liable for any direct, indirect,
incidental, special, exemplary, or consequential
damages (including, but not limited to, procurement
of substitute goods or services; loss of use, data, or
profits; or business interruption) however caused and
on any theory of liability, whether in contract, strict
liability, or tort (including negligence or otherwise)
arising in any way out of the use of this software, even
if advised of the possibility of such damage.

All information provided related to future Intel products and plans is
preliminary and subject to change at any time, without notice.

WPA™ and WPA2™ are trademarks of Wi-Fi Alliance®.

COPYRIGHT AND LICENSE

«
...
7
8
9
10
11
...
»

Содержание Vesta BLMVE





































































































































Отзывы:

Нет отзывов

Похожие инструкции для Vesta BLMVE

Бренд: Fastbind Страницы: 4

Бренд: Panasonic Страницы: 88

Бренд: Singer Страницы: 72

Kenmore 385.12116690

Бренд: Sears Страницы: 93

Бренд: SCANMASKIN Страницы: 60

Heavy Duty 1000

Бренд: Janome Страницы: 72

Бренд: Radio Shack Страницы: 36

Бренд: Sagem Страницы: 2

Бренд: Olivetti Страницы: 64

Бренд: DIAKAT Страницы: 10

IP PHONEFAX 49A

Бренд: Sagem Страницы: 56

Бренд: Advance acoustic Страницы: 40

Бренд: IPC Страницы: 40

Бренд: Alto Страницы: 51

NOVAMATIC NM 2830

Бренд: FUST Страницы: 49

Бренд: Koblenz Страницы: 16

AFX LIGHT 15-175

Бренд: LOTRONIC Страницы: 11

Бренд: Bartell Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды