![background image](http://html1.mh-extra.com/html/baby-lock/vesta-blmve/vesta-blmve_instruction-and-reference-manual_462521118.webp)
Troubleshooting
116
Error messages
When erroneous operations are performed messages and advice on operation will be displayed on the LCD. Follow what is
displayed. If you press
or do the operation correctly while the error message is displayed, the message disappears.
Error messages
Cause/solution
1
A malfunction occurred. Turn the machine off, then
on again.
This message is displayed if a malfunction occurs.
Turn the machine off, then back on again.
If this message continues to appear, please contact your authorized Baby
Lock retailer.
2
Cannot change the configuration of the characters.
This message is displayed when there are too many characters and the
curved character configuration is impossible.
3
Cannot change the font since some letters are not
included to the selected font.
This message appears when the font of the embroidery character pattern is
changed to one that does not include characters used in the pattern.
4
Cannot recognize the data for the selected pattern.
The data may be corrupted. Please turn off the
power and turn on again.
This message appears when you try to retrieve pattern data that is invalid.
Since any of the following may be the cause, check the pattern data.
• The pattern data is damaged.
• The data that you tried to retrieve was created using another
manufacturer’s data design system.
Turn the machine off, then on again to return it to its normal condition.
5
Check and rethread the upper thread.
This message is displayed when the upper thread is broken or not threaded
correctly, and the “Start/Stop” button, etc. is pressed.
6
Data volume is too large for this pattern.
This message is displayed when the patterns you are editing take up too
much memory, or if you are editing too many patterns for the memory.
7
Lower the buttonhole lever.
This message is displayed when the buttonhole lever is up, a buttonhole stitch
is selected, and the “Start/Stop” button, etc. is pressed.
8
Lower the presser foot lever.
This message is displayed when a button, such as the “Start/Stop” button,
was pressed while the presser foot was raised.
9
No more patterns can be added to this combination. This message is displayed when you tried to combine more than 70
decorative stitches.
10
Not enough available memory to save.
This message is displayed when the memory is full and the stitch or pattern
cannot be saved.
11
Not enough available memory to save the pattern.
Delete another pattern?
This message is displayed when the memory is full and the stitch or pattern
cannot be saved.
Press
and delete a previously saved stitch or pattern to save the current
one.
Press
to return to the original screen without saving.
12
OK to recall and resume previous memory?
This message appears if the machine is turned off while embroidering, then
turned on again.
Press
to return the machine to the condition (pattern position and
number of stitches) when it was turned off. Follow the procedure described in
“If the thread breaks during sewing” on page 95 to align the needle position
and embroider the remainder of the pattern.
13
Pattern extends to the outside of embroidery frame.
This message appears when the selected embroidery pattern is larger than
the embroidery frame selected when [Embroidery Frame Identification View] is
set to [ON].
14
Pattern extends to the outside of embroidery frame.
Add no additional characters.
This message is displayed when the character pattern combination is too
large to fit in the embroidery frame. Change the character pattern size or
layout the patterns to fit the embroidery frame. If [Embroidery Frame
Identification View] is set to [ON], setting to [OFF] or selecting larger frame
may help.
15
Pattern extends to the outside of embroidery frame.
This function cannot be used at this time.
This message appears when the embroidery character pattern is resized or
switched between written vertically/horizontally so that it is too large for the
embroidery frame.
16
Preventive maintenance is recommended.
Once this message appears, it is recommended to take your machine to an
authorized Baby Lock retailer for a regular maintenance check. Although this
message will disappear and the machine will continue to function once you
press
, the message will display several more times until the appropriate
maintenance is performed.