ERROR MESSAGES
198
If the operation procedure is incorrect, the machine does not start. An alarm sounds and an error message
is displayed on the LCD. If an error message displays, follow the instructions in the message.
Below is an explanation of error messages. Refer to these when necessary (if you touch
or do the
operation correctly while the error message is displayed, the message disappears).
ERROR MESSAGES
Memo
• Refer to the Instruction and Reference Guide (Sewing) for error messages about the wireless LAN
function.
Error messages
Cause/solution
1
Cannot change the configuration of the characters.
This message is displayed when there are too many characters and the
curved character configuration is impossible.
2
Cannot recognize the data for the selected pattern.
The data may be corrupted.
This message is displayed when there is a possibility that the data for the
selected pattern is corrupted.
3
Cannot recognize the embroidery positioning mark.
This message is displayed when the machine failed to recognize the
embroidery positioning mark.
- Confirm that the embroidery positioning mark is in the selected area. Refer
to steps
c
through
d
of “Using the Embroidery Position Sticker to Align
the Embroidering Position” on page 45.
- Refer to “The machine does not detect the embroidery positioning sticker.”
on page 196.
4
Change to a larger embroidery frame.
This message is displayed when the machine is in embroidery mode and the
selected pattern is too large to fit in the attached frame.
This message may also appear while aligning an embroidery pattern using the
built-in camera and the repositioned pattern does not fit in the attached
frame.
5
Data volume is too large for this pattern.
This message is displayed when the stitch patterns you are editing take up
too much memory, or if you are editing too many stitch patterns for the
memory. For a combined pattern, reduce the number of patterns.
6
Failed to save file.
This message is displayed when no more images can be saved on the USB
media. In this case, delete a file from the USB media or use different USB
media. (page 89)
7
Includes a special pattern that cannot be saved to
external memory. Save the pattern in the machine’s
memory.
This message is displayed when you try to save a copyright protected pattern
to USB media or computer. According to copyright laws, patterns that are
illegal to reproduce or edit cannot be saved to USB media or computer. If this
message displays, save the pattern in the machine’s memory.
8
Lower the presser foot lever.
This message is displayed when the “Presser Foot Lifter” button is pressed
while the presser foot lever is raised and the needle is lowered.
9
Not enough available memory to save the data.
Delete some patterns or use a different media.
This message is displayed when the memory is full and the stitch or pattern
cannot be saved.
10
OK to recall and resume previous memory?
This message appears if the machine is turned off while embroidering, then
turned on again. Touch
to return the machine to the condition (pattern
position and number of stitches) when it was turned off. Follow the procedure
described in “If the Thread Breaks during Embroidering” on page 53 to align
the needle position and embroider the remainder of the pattern.
11
OK to recall and resume previous memory? (IQ
Designer)
This message is displayed when the machine is turned off while a pattern is
being edited in IQ Designer, then turned on again, and then IQ Designer is
started. Touch
to return to the screen before the machine was turned
off.
12
OK to separate the combined border pattern?
This message is displayed when rotating a saved combined border pattern in
the embroidery screen.
13
Pattern extends to the outside of embroidery frame.
This message is displayed when the machine is in embroidery mode, and the
character pattern combination is too large to fit in the embroidery frame.
14
Pattern extends to the outside of embroidery frame. If
you plan to add more patterns, rotate the pattern
combination.
This message is displayed when the machine is in embroidery mode and the
combined character pattern is too large for the embroidery frame. You can
rotate the pattern 90 degrees and continue combining characters.
15
Preventive maintenance is recommended.
This message is displayed when the machine needs to be maintained.
16
Remove Dual Feed module from the machine.
This message appears when you try to start embroidering with the dual feed
foot attached to the machine. Remove the dual feed foot before entering the
embroidery mode.
Содержание Solaris VISION BLSA3
