8
Step 3: End Leg Assembly
Parts needed
1-Table Assembly
2-Upper End Leg A
2-Upper EndLeg B
2-Lower End Leg
4-Leveling Glide
12-M8x16mm Socketed Button Head Cap Screw
QF09318-07
8-M8x25mm Socketed Button Head Cap Screw
QF09318-06
4-Nylon Washer
Tools Required
5mm Allen Wrench (provided)
3-1:
With the table on the protective surface,
still facing down, position the upper end legs A
& B so the height adjustment holes face each
other across the short end of the table. (See
Fig. 3-1
and
Detail 3.1.
)
Step 3
End Leg Assembly
3-2:
Attach each upper end leg to the table
with two (2) M8x16mm screws through the
upper corner leg brackets at front or rear and
with two (2) M8x24mm at the end. Lightly
tighten for now with the 5mm Allen wrench.
Fig. 3-1
Fig. 3-2
Detail 3-1
Height-Adjustment
Holes
Upper
End
Leg A
Upper
End
Leg A
Upper
End
Leg B
Upper
End
Leg B
M8x16mm QF09318-07
front and rear
M8x25mm
QF09318-06
at end
Содержание Pearl BLQF
Страница 1: ...1 ...
Страница 19: ...19 Detail 8 1a Detail 8 1b Detail 8 1c Step 8 Ratchet Stop Assembly continued Finger ...