17
Step 7
Track Assembly (continued)
Fig. 7-5
Fig. 7-6
Track Support
Plastic Track
7-9:
Place the machine onto the carriage
and again, roll it the entire length of the
frame, working the tracks into the wheels
as you go. Lightly tighten the front track
support screws as you move down the table.
Check the carriage to verify that it rolls
smoothly and that both ends of the carriage
are engaging the tracks. (
Fig. 7-6
).
If you find a section of track where the
carriage rocks back and forth when moved
all the way forward or back, loosen the front
track support screws, adjust the front track
until the carriage rolls smoothly and does
not rock, then re-tighten the front track
screws.
7-10:
Finally, fully tighten the front track
screws to the table.
Detail 7-5
Track Support QF5300-02
Plastic Track QF5300-04
Содержание Pearl BLQF
Страница 1: ...1 ...
Страница 19: ...19 Detail 8 1a Detail 8 1b Detail 8 1c Step 8 Ratchet Stop Assembly continued Finger ...