Baby Lock BLE1EX, Инструкция и справочник

Страница: 20 / 50

U L
Unlocked Position for Serging
Tension Adjustment
After threading is complete, move the lock button release lever to the right until it stops. You will
hear the lock release as the lock button pops out automaticarry. (fig. C) Close the front cover.
Note: If the lock button is not released, the machine will not run, even if you operate the foot
controller.
Your baby lock's thread tension is preset at the factory for standard thread and fabric. But the
tensions will require adjustment at times, depending on the thread and fabric being used and the
stitch to be formed. Refer to the tension chart on the inside back cover. Also, study the diagrams
that accompany the explanation of each stitch type. For best results, always sew a test sample
before beginning to serge on the actual project.
18
T
H
R
E
A
D
I
N
G
C C