Baby Lock BLE1EX, Инструкция и справочник

Страница: 16 / 50

U L
U L
U L
U L
Threading Your enspire
Lower Looper
Threading Position for Threading
Your baby lock enspire is equipped with an exclusive "Instant Jet-Air Threading System" for fast,
easy threading of the upper and lower loopers.
One push of the "Jet-Air" threading lever will automatically thread the loopers. It is no longer nec-
essary to use tweezers for threading the thread guides.
If a thread breaks or runs out, just re-thread it. There is no need to follow any threading sequence.
1. Open the front cover.
2. Raise the presser foot to release all threads.
3. Depress the machine lock button firmly. (fig. A)
4. Rotate the machine handwheel slowly toward you until the tubes move to their connecting po-
sition. (fig. B)
Note: The Imagine must be in the locked position when threading the loopers unless otherwise
indicated.
1. With the presser foot up and machine lock button in the locked position (fig. A-B) , set the looper
threader selector lever to "L" for lower looper threading. (fig. B)
2. Place the thread cone or spool on the far right front spool pin on the thread stand (fig.C page
15). Slip the thread into the telescopic antenna thread guide "1" directly above the spool, snap
into the thread guide "2" at the top of the machine, through the slot on the front of the machine.
(fig. C page 15)
3. Pull 18 inches (45cm) of thread through guide "3". Insert the end of the thread into the threading
port "L" about 1 inch (2,5cm) . Use tweezers if necessary, to insert the thread end more easily.
4. Depress the looper threading lever. (fig. D page 15) If the thread does not go through the
lower looper eye with one push, depress the threading lever again until it does. *(see page 15)
5. Clip the thread 4 inches (10cm) from the lower looper eye and leave it hanging loose.
6. Move the lock button release lever to the right.
Looper Threader Looper Threader
Selector Selector
Lock Button Lock Button
Release Lever Release Lever
Machine Lock Machine Lock
Button Button
14
T
H
R
E
A
D
I
N
G
A A B B