When folding the bed (Figure 11), please press the bed body firmly.
Because the long side handrail is not fully compressed, you need to
fold it again to press the long side handrail button until its flank is at a
right angle (Figure 12).
1.Remove the mattress from
the bottom base to loosen the
structure.
2.Pull the plastic lock on the
bottom base up to loosen the
structure.
3.Hold the plastic lock and push
downward the side rails, do the
same thing for the four sides.
5.Place all parts and basic playard on the mattress, wrap up the baby
playard with the mattress and fasten them together with velcro straps, then
put it into the carry bag and zip it up.
4.Pull all four corners of the
basic playard together.
FOLDING THE BABY PLAYARD
SPECIAL NOTICE:
FIG.11
FIG.12
• This product must not be used for children weighing more than
33lbs(15kg).
• Always secure the baby on the changing table with the safety belt.
• NEVER leave baby unattended.
• Never use the baby changing table if any parts are defective, broken or
missing. When changing baby on the changing table, ensure that the
wheels are always in a locked position.
• Regularly check all assembly fittings.
• Please clean, maintain and check this product regularly.
• Any additional or replacement parts must be obtained exclusively from
the manufacturer.
• Keep the product away from the intense heat of open fires, electric or
gas heaters etc.
WARNING
08
09
babyjoy
babyjoy
