19
FEATURES
Remove vehicle seat belt or lower anchor strap slack. Press down
firmly near the front of the base. (rear-facing installation with
vehicle lap and shoulder belt shown).
Do not pull on the belt with excessive force.
If the belt or strap
is too tight, you will not be able to close the RAPIDLOCK.
Do
NOT lock the vehicle seat belt. The RAPIDLOCK locks the
seat belt.
When the slack is removed, close the RAPIDLOCK Lock-Off
until you hear a “Click”. Make sure the vehicle seat belt or lower
anchor strap is under the RAPIDLOCK Lock-Off.
The RAPIDLOCK lock-off MUST be used when installing this
seat rear-facing.
CLICK
When installing the seat with the vehicle seat belt,
BOTH
the lap portion and the shoulder
portion of the vehicle seat belt
MUST
be routed under the RAPIDLOCK arm. If your vehicle
seat belt only has a lap belt, then route the lap belt under the RAPIDLOCK. When installing
the seat with the lower anchor attachment system, the lower anchor strap is routed under
the RAPIDLOCK. An example of a rear-facing installation is shown below:
VEHICLE LAP AND
SHOULDER BELT
LOWER ANCHOR
ATTACHMENT