32
INSTALL WITHOUT BASE
3 If your shoulder belt is long enough, you
may route the shoulder belt behind the
seat and through the Taxi-safe seat belt
guide as shown.
4 Lock the vehicle seat belt. In most
vehicles today,
slowly pull the shoulder
belt all the way out
and then let it go
back in. You will hear a “clicking” sound.
Slowly pull out on the belt and it should
be locked. If not, review your car’s
owner’s manual and page 13.
5 Tighten the vehicle seat belt. Lay your
forearm across the car seat at the
belt path and push down. Pull on the
shoulder belt to tighten while feeding
the slack back in the retractor.
6 Test for tightness. Grab the sides of the
car seat where the seat belt is and push
and pull the car seat from side to side
and front to back.
If the car seat moves less than 1” (2.5
cm), it is tight enough.
6
4
5
3
