How to turn on the device? Permanently, press the red switch button for 2 seconds, waiting
for a numeric value to appear on the display. This is factory setting "3".
Operational condition, everything is fine. This is how the device works when a level higher
than the set value is detected.
If the device does not feel movement, three consecutive warning beeps can be heard after
12-13 seconds, and if there is still no noticeable movement, the device will alert you in the
20th second. The alarm can be stopped by pressing the red button once. Normally, if there
was no alarm, the button should be pressed twice to turn it off.
