Babboe E-Power, Руководство пользователя

Страница: 14 / 27

6
6. Mounting the stem with handlebars onto
the rear panel
A
E
2x
10 mm
B
C
2x
E
C
Mount the stem with handlebars onto the chassis using the
bolts (E). Attention: The cables should not be turned
around the stem (A). Attach the rear panel to the frame
using the bolts (C).
Attention: Only screw the two nuts and bolts (C) finger
tight. They should only be further tightened when all
panels of the box have been put in place.
E
Important: : When the stem with handlebars has
been mounted, the rear frame should be held
straight. Only then should the large nuts (H) be
screwed as tightly as possible.
Suggestion 1: When aligning the rear
frame make sure that the seat post is
aligned with the stem.
Suggestion 2: Make sure that one person
is carefully aligning the rear frame while
another person tightens the bolts as
much as possible.
Result
Suggestion 3: Tighten the bolts again
after having used the Babboe a
few times.