Babboe E-Power, Руководство пользователя

Страница: 15 / 27

7. Attaching the brake cables to the front wheels
The cables have been pre-assembled and only have to be inserted.
F
E
E
7
F
1. Check if the cables are properly inserted in their holders (A1/A2).
2. Lead the long cable (sticker L) of the left front brake around the
outside of the tilt stopper (B) (Tilt Stoppers: Handles underneath the
bike that prevent the user from over-steering.) and lead it through
hinge (C) which is used for the brake arm as well. Insert the adjust-
ment bolt (F) in the slot of the brake arm (G) and hang the cable end
in the calliper (or black metal hook hanging from the hub brake) (E).
To do this you should push the calliper (black metal hook) towards
the cable.
3. Lead the short cable of the right front brake on the
inside of the tilt stopper and lead it
through hinge C (which is also used for
a brake arm.
4. Use the plastic ties (Nr. 15) to attach
the cables to the tilt stoppers.
strakker stellen
losser stellen
1
1
A1
Topside
A2
Bottom Side
Suggestion: The brakes can be
tightened and loosened using the
adjustment bolt screw (F).
First release the cable end so the
adjustment bolt can be removed
from the slot of the brake arm.
Turn the adjustment screw outwards
to tighten the brake (to the right in
the picture F below). Turn the
adjustment screw inwards to loosen
the brake. When you are finished put
the cable end in the calliper (black
metal hook) again.