BABBITT LS8500, Руководство пользователя

Страница: 11 / 20

www.babbittinternational.com Reference Manual
2021
11
Figure 3-7
3.6 Installing the Receiver
The receiver is a printed circuit board measuring 3” x 4 ½”. It is mounted in a plastic snap track that is
provided with each unit. The snap track can be mounted in existing control panels or enclosures can be
ordered from the factory.
1) Attach the snap track to the panel back pan or other surface using 2 small screws or a suitable
adhesive.
2) Snap the LS8000/R (same as LS8500) receiver card into the snap track.
3) Connect shielded cable to the 3 terminals marked G, S, +. (see page 13 for wiring diagram)
4) Connect the proper supply voltage and relay output wiring for your application. (see page 12)