In PPM-UP mode, the device will turn on the AC-Station (CO
2
) module when the current value is lower
than [TARGET]-[DEADBAND] value, and immediately turn off the AC-Station (CO
2
) module after the
[TARGET] value is reached.
In FUZZY-LOGIC mode, the device will turn on the AC-Station (CO
2
) module when the current value
is lower than [TARGET], and immediately turn off the AC-Station (CO
2
) module when the [TARGET]
+ [DEADBAND] value is reached.
In MANUAL mode, the device does not perform any automatic CO
2
regulation action.
High PPM Protection
CO
2
Target
value
Activate
Value
(Fuzzy Logic
/PPM UP)
Deadband
(5.5) Current working status display
When performing actions, the current device will display the specific working status of the device.
In different modes, different icons are used to display the current working status.
(5.6) Interlock settings
When performing actions, the working status of CO
2
and cooling may be inconsistent when using
different equipment, that is, when the fan is on for cooling, the CO
2
will not be achieved with fan.
Therefore, in the above scenarios, it is necessary to enable the interlocked CO
2
and cooling
function.
When performing actions, the working status of CO
2
and dehumidification may be inconsistent
when using different equipment, that is, when the fan is on for dehumidification, the CO
2
regulation
will not be achieved with fan. Therefore, in the above scenarios, it is necessary to enable the CO
2
and dehumidification interlock function.
21
Icon
Mode
Status
PPM UP
OFF
PPM UP
ON
FUZZY LOGIC
OFF
FUZZY LOGIC
ON
