3. Device Status
In the main setting interface, press the "CONNECTION STATUS" to enter the device status interface.
The devices displayed in the interface are SENSOR, DEVICE, CH1 light line 1, CH2 light line 2, and
PORT.
4. Home Page
In the Home Page, the real-time data of VPD, humidity, temperature, and CO
2
are displayed.
In the upper left corner, the humidity value, humidification on value, dehumidification on value, and the
corresponding Deadband value are displayed.
In the lower-left corner, the temperature value, heating on value, cooling on value, and the
corresponding Deadband value are displayed.
In the upper right corner, the target value of CO
2
, Deadband value, and high CO
2
PPM protection
value are displayed.
In the lower right corner, the light type, on time, off time, working mode and brightness output are
displayed.
The corresponding online status of the port is also displayed in the interface:
If the device is not registered, it will not be displayed.
If the device is registered and connected, the status indicator
will be green.
If the device has been registered but not connected, the status
indicator will be red.
CONNECTION
STATUS
18
