APP
MODULE Documentation
BAB TECHNOLOGIE GmbH 25
Change the “Physical address”. Please follow the rules for assigning physical addresses in a KNX
system.
Figure 20: KNX – Physical Address
Assign at least 2 physical addresses (not used in the relevant line) for KNXnet/IP Tunneling.
Figure 21: KNX – assigning a KNXnet/IP tunneling address
Note: These addresses are required for establishing a connection for the commissioning software ETS for
use of the
APP
MODULE as an interface to KNX. As of ETS 5, at least 2 free addresses are required here.
Save the configuration.
Figure 22: Saving the configuration