B9Creations Core Series Printer User Manual Rev. A-3
04-14-2020
F.
Funnel (1x) – to direct material back into holding bottle
G.
Material Strainer (1x) – to separate and remove cured pieces from material
H.
Replacement Filters – to replace clogged chamber filters
I.
Isopropyl Material Filters (5x) – to clean material out of Isopropyl Alcohol
J.
Squeeze Bottle – for Isopropyl Alcohol (Isopropyl Alcohol is not provided in this kit)
K.
Tweezers (1x) – to aid in cleaning part and removing cured pieces from material
L.
Clippers (1x) – to clean supports from print
5
Identification and Interface
5.1
Product Identification
Manufacturer and electrical specification information (Product Identification Label) can be found on the
printer rear panel. An example of this label is shown in section
12.4
of this User Manual.
NOTE
If requesting technical assistance, always take note concerning the model number and serial number of
the device.
5.2
Interface Elements
1. Front Door (Place fingers in area indicated to pull door
open)
2. USB Port (for Low Voltage Mass Storage device ONLY)
3. Function Button
4. Touch Screen Display
Product
Identification
Label
1
2
3
4
