B9Creations B9 Core 530, Руководство пользователя

Страница: 32 / 35

B9Creations Core Series Printer User Manual Rev. A-3 04-14-2020
If none of the above solves the
problem, contact the
B9Creations, LLC support
2 Touchscreen lights
up but does not
display
B9Creations
Core Series main
page.
Printer requires a re-boot Turn rear On/Off button “Off.”
Wait 15 seconds. Turn rear
On/Off button “On.”
If none of the above solves the
problem, contact the
B9Creations, LLC support
3 Touchscreen displays
the B9Creations Core
Series main page, but
touchscreen is not
responsive.
Printer requires a re-boot Wait 5 minutes. Turn rear
On/Off button “Off.” Wait 15
seconds. Turn rear On/Off
button “On.”
If none of the above solves the
problem, contact the
B9Creations, LLC support
4 Indication Fails to
start printing
Door Open Close door to start printing
Prior print or aborted file not
removed from printer See Sections 9.11 and 9.12.
Clean Build Table. Install Build
Table in printer. Close door.
Start print job.
Print workflow not followed
correctly Re-load model onto
B9Creations Core Series , follow
print procedure
Print Model not loaded or is
loaded incorrectly Re-load model onto
B9Creations Core Series , follow
print procedure
If none of the above solves the
problem, contact the
B9Creations, LLC support
5 Printer Operates, but
Indication fails to
print
Print model not created
properly Check model in B9Create ,
insure model is “snapped to
floor”
Error with Print model file Load and print “Test” model. If
test model prints accurately, .stl
model is not correct. Remake
.stl file and reprint.
Print Model not loaded or is
loaded incorrectly Re-load model onto
B9Creations Core Series , follow
print procedure