B2 HVA28TD Скачать руководство пользователя страница 7

Страница: 7 / 73

1 Forward

b2electronic

gmbh

DHV0053 b2 EN

1.2

Documentation Conventions

The following explain the

symbols

, and

safety messages

found in this

document. The employment of safety symbols and signal words

are according

to the American National Standards Institute standard ANSI Z535.6 "Product
Safety Signs and Labels".

Safety Messages

Symbols

Danger

DANGER

Indicates a hazardous situation which if not avoided will result in death or
serious injury

Warning

WARNING

Indicates a hazardous situation which if not avoided could result in death or
serious injury.

Caution

CAUTION

Indicates a hazardous situation which if not avoided could result in minor or
moderate injury.

Notice

NOTICE

Indicates suggested practices to protect equipment and property.

Yellow triangle, framed in black: Used to indicate a potential hazard.
Only used in conjunction with description of the possible hazard!
Detailed symbol may correspond to this specific hazard.

Red outlined circle with red diagonal line: Used to indicate forbidden practices.
The described handling practice must not be carried out!

Blue circle with white exclamation mark: Used to indicate recommended
precautionary measures or a situation that can lead to property damage.

Содержание HVA28TD










































































Результаты поиска

Содержание HVA28TD

Отзывы:

Бренды по названию

Популярные бренды

B2 HVA28TD, Руководство пользователя

Результаты поиска

Содержание HVA28TD

Отзывы:

Бренды по названию

Популярные бренды