b2 electronic TanDelta TD120-MC, Руководство пользователя, Страница: 46 / 55

6 Software TD ControlCenter
46 DHV0075 b2 EN © b2 electronic gmbh
Initial Connection to the TD unit (Establish and Test connection)
To establish the connection and to fix the settings of the COM-port you have to
perform an initial connection to the TD unit. This is also verifies a correct setup.
Double click the TD System icon.
Step Procedure
(Initial Connection to TD)
Connect TD System
Connecting to the TD System
Connection
Established Connection!
Read the information and note the COM-Port
Number.
This number is used by the TD
ControlCenter to communicate with the TD
unit.
Step Procedure
(Initial Connection to TD)
Close (disconnect) the Test connection
Right click on the TD System icon and select
Disconnect.
It is also possible to switch off the TD system
and the connection will automatically be
closed.
WARNING
Installation finished!
The System is now configured and you can start working with the TD
ControlCenter. You will use the given COM-Port number to set in the
ControlCenter and press the connect button.