B.Well WA-88, Инструкция по эксплуатации

Страница: 12 / 36

10
5.3. Fitting the cuff
a) Remove all eventual objects and jewellery (e.g. wristwatch) from
the wrist in question.
Draw the cuff over the wrist.
b) The distance between the cuff and the hand should be approx.
10 mm.
c) Secure the cuff with the Velcro fastener, so that it lies comfortably
and not too tight, whereby no space should remain between the
cuff and the wrist.
d) Lay the arm on a table, with the palm upwards. Support the
arm a little with a rest (cushion), so that the cuff rests at about
the same height as the heart. Take care, that the cuff lies free.
Remain so for 2 minutes sitting quietly, before beginning with
the measurement.
e) In case the measurement is to be carried out on the right wrist, position the cuff accordingly.
However, measurements should always be carried out on the same wrist, so that the values can
be compared with each other.
istruction_All.indd 10 13.04.2006 16:06:53