PGE-W series crane scale Technical Manual
- 7 -
8.
OPERATION
1. Basic Operation
A. Power on and off
Please press
ON/OFF
key before you operate this scale, and if you want to
switch off press
ON/OFF
key again.
B. Zero the scale
When there is no item on the scale but reading is not zero, press the
Zero
key
to make re-zero reading. After operation, the zero indicator will on.
(Note, when current reading more then 2% of capacity, press this key will do
tare operate)
C. Tare operate
When you load a container, and want to weigh with goods in container later, you
can press
Zero
key with container, display will show “0.00”.
(Note, when current reading less then 2% of capacity, press this key will do zero
operate, this means tare weight must > 2% of capacity)
D. Change units
To change from lb to kg’s press the UNIT key, LED labeled lb will be lit, when
in lb unit of measure
E. Change division
You can use the
CHANGE
key to change division size (refer to F0 in
parameters)
F. Overload Warning
Please do not add item that is over the maximum capacity. When
reading“--ol-”, remove the item from the scale to avoid damage to the load cell.
2. AUTO SLEEP
PGE-W
series crane scale have an automatic sleep function, (to disable this
function, see parameter F5 sl ). When weight goes under min weight (20d)
after the settings time,
PGE-W
will automatically enter sleep mode. Then press
any key to add weight on the hook,
PGE-W
will return to normal weighing
mode again.