www.B-TEK.com
2020
Floor Scale Installation Manual
6
Clydesdale Carbon Steel Floor Scale
General Specifications:
Certificate of Conformance:
94-092A4
Type:
Above ground or pit
Scale Capacity:
500 - 20,000 lbs. - NTEP Approved Capacities
End Load Capacity:
80% for 2.5K capacity
100% for 5K to 20K capacities
Scale Height:
4-3/8” nominal (2.5K - 10K-SE) adjustable
5-3/8” nominal (10K-LE - 20K) adjustable
Available Sizes:
2’ x 2’ - 8’ x 10’ - NTEP Approved Sizes
Any custom size platform available - 18” x 18” to 10’ x 12’
Weighbridge:
Laser cut 1/4” carbon steel tread plate with formed channel sub-structure (2.5K - 10K-SE)
Laser cut 3/8” carbon steel tread plate with structural channel sub-structure (10K-LE & 20K)
Deck:
Top access junction box, leveling foot adjustment holes.
Threaded lifting eye bolt holes: 5/8”-11 eyebolt
Paint System:
Alkyd Enamel
Load Cell:
Plated alloy steel, 350 Ohms, 3.0mV/V FM Approved
500lb capacity: (4) 250lb. cells
1K capacity:
(4) 500 lb. cells
2.5K capacity: (4) 1,000 lb. cells
5K capacity:
(4) 2,500 lb. cells by request in Clydesdale
5K capacity:
(4) 4,000 lb. cells
standard in Clydesdale
10K SE capacity: (4) 5,000 lb. cells (small envelope)
10K LE capacity: (4) 5,000 lb. cells (large envelope)
20K capacity:
(4) 10,000 lb. cells
Optional Stainless Steel cells are available for any capacity listed above
Leveling foot:
B-TEK stainless steel ball encapsulated foot
Junction Box:
NEMA 4 fiberglass reinforced plastic (FRP) with signal trim summing board
Warranty:
3-Years on weighbridge steel structure,
2-Years on load cells, junction box and summing board
