www.B-TEK.com
2020
Floor Scale Installation Manual
4
Introduction
This manual is meant as an installation guide for the B-TEK floor scale. This includes the following models:
4 Square 4’ X 4’ carbon steel floor scale
BT-FC carbon steel floor scale
BT-FS stainless steel floor scale
BT-LD stainless steel Lift Deck
BT-RP Rocker Pin Suspension floor scale
BT-FCHD Workhorse platform scale
BS-CS-DS carbon steel Drum scale
BS-SS-DS stainless steel Drum scale
The 4 Square model of floor scale is a 4’ X 4’ platform with a NTEP approved capacity of 5,000 lbs.
The Clydesdale series of carbon and stainless steel floor scale is available in standard platform sizes from 2’ X 2’ to 10’
X 8’, which are NTEP approved. Capacities range from 500 lbs up to 20,000 lbs for NTEP approved capacities. Custom
sizes and other capacities are available, contact the factory for more information.
The Clydesdale Stainless Steel Lift Deck is available in standard platform sizes from 3’ x 3’ - 4’ x 6’, which are NTEP ap
-
proved. Capacities range from 2,500 to 5,000 lb. Custom sizes and other capacities are available, contact the factory for
more information.
The Rocker Pin Suspension series of carbon and stainless steel floor scale is available in standard platform sizes from 3’
x 3’ to 5’ x 7’, which are NTEP approved. Capacities range from 500 lbs to 10,000 lbs. Custom sizes and capacities are
available, contact factory for more information.
The Workhorse series of carbon steel scales is a heavy duty version platform scale with standard size of 4’ X 4’ to 12’ X
10’. Capacities range from 20,000 lbs up to 40,000 lbs. The scale is NTEP approved. Custom sizes and other
capacities are available, contact the factory for more information.
The Drum scale series is available in both carbon and stainless steel versions. Standard platform sizes are 24” X 24”,
30” X 30”, 36” X 36” and 48” X 48”. Standard capacities are 1,000 lbs and 2,500 lbs, which are NTEP approved. Optional
accessories include integral and detachable access ramps, indicator column and portability kits. Custom sizes and other
capacities are available, contact the factory for more information.
No physical or electrical changes / alterations may be made to the scale during installation or use, which may void the
warranty. This includes removal, addition or modification of any steel or components, as well as electrical or program
related items.
Prior to installation it is the customer’s responsibility to verify that the equipment meets the requirements of the
application. Do not begin installation if this is unknown. It is the customer’s responsibility to ensure that the scale
equipment is operated within the manufacturer’s specifications.
Any repairs must be performed by B-TEK Scales authorized service technicians.
Failure to comply with this policy voids all implied and/or written warranties.
