11
4.
Reassemble in reverse order.
Water Supply Tank
•
Turn off water supply valve to the appliance.
•
Empty water tanks as described in the appliance operating instructions.
•
To service the water feed tank;
1. Open the bottom deck door to gain access to the top of the feed tank.
2. Remove the wing nut located on the top of the feed tank cover.
3. Reassemble in reverse order.
To service/remove main water tank, please contact the manufacturer:
B&S Commercial Kitchens Pty Ltd
57 Plateau Road
Reservoir VIC 3073
Tel.: + 61 3 9469 4754 Fax.: + 61 3 9469 4504 E-mail: [email protected]
Adjustments
•
Pilot
1.
Remove front panel as described under GAINING ACCESS TO GAS CONTROLS.
2.
To increase gas pressure to pilot, turn adjustment screw located at the top right hand side of the flame
failure devise anti-clockwise.
3.
To decrease gas pressure to pilot, turn adjustment screw located at the top right hand side of the flame
failure devise clockwise.
4.
REASSEMBLE IN REVERSE ORDER.
•
Aeration
Aeration to burner is fixed and cannot be adjusted.
•
Ignition
1.
Spark gap is fixed at 8mm from the top of the ignition electrode rod to the head of the pilot.
2.
Should adjustment be required, follow steps outlined under IGNITION SYSTEM in these servicing
instructions.
Содержание DSK Series
Страница 3: ...3 STANDARD WARRANTY CONDITIONS 13 ...
