b-mola BM20, Руководство пользователя

Страница: 12 / 14

07
1.Power On/Off Switch
ON: Press ON/OFF Switch to turn on the appliance. There will be a music sound
to indicate that the power is on.
OFF: Press and hold the ON/OFF Switch again for 3 seconds to turn off the appliance.
Press the power button,the machine starts to operate,and the flowspeed is preset to
medium level.When the product is operating,press the power button to change the flow
speed.
2. Low/Medium/High Level
Operating Instructions
08
Always unplug the appliance before cleaning or carrying out other
maintenance except replacing filters.
ATTENTION
When using chemically treated cloth, be sure to follow the instructions.
Do not leave disassembled parts unattended while performing maintenance.
Do not operate the product without the filter installed, as this may cause irreversible damage to
the NCCO Reactor.
The efficiency of the NCCO Reactor will significantly decline if the HEPA filter does not replace as
indicated in instructions.
Cleaning Instructions
Cleaning air inlet and outlet
Clean the air inlet and outlet with a soft brush or vacuum
cleaner.
2
Cleaning pre-filter
Pre-filter is washable.
To optimize the lifespan of the pre-filter, make sure it is air-dried
thoroughly after cleaning.
3
4
Never rinse or soak the HEPA filter or NCCO
Reactor with water.
WARNING
Cleaning the body of air purifier
Use a soft, dry cloth to clean the interior and
exterior of the air purifier.
Never use abrasive, aggressive, or flammable cleaning
agents such as bleach or alcohol to clean any part of the
air purifier.
ATTENTION
Cleaning Instructions
Care & Maintenance
WARNING
1
Getting Started
■
■
■
■
ATTENTION
■ The product equips with an intelligent protection system. It will stop operating with all
indicating lights off for 30 minutes after 8 hours consecutive operation. The appliance will
resume working automatically after 30 minutes. The user can reactivate the product at any
time by pressing the Power On/Off button.
■ Press and hold the power button and the reset button for 5 seconds when the machine
is turned off to factory reset the machine.
Lighting：
Flow Light Colour
Low Level Green
Medium Level White
High Level Blue