b-mola BM20, Руководство пользователя

Страница: 11 / 14

06 05
Getting Started
Installing the filters
Unplug the appliance, find the groove
under the front panel, and remove the front
panel by pulling it outward.
Please make sure all filters are installed.
ATTENTION
Illustration Diagram:
Basic Information
Main Parts & Components First Time Use
Place the HEPA filter and the pre-filter onto the
NCCO reactor.
Place the filtration unit into the device.
There is a click sound to indicate all the
filters install successfully.
Remove all packaging before use.
1. Remove all packaging and clean all removable
parts and the grooves of the product with a
soft, dry cloth.
2. Make sure the power sockets and extension
units meet the requirements of the product.
Make sure the product connects to the
power supply before use.
3. This product is equipped with a sensor to
monitor the position of the filter unit. If the
filter unit is not in the correct position, the
product will not work.
4. It is normal for the product to emit warm air
with a mineral smell from the air outlet when
the product first works. It is because the
catalytic oxidation reaction is going on inside
the NCCO Reactor.

4