b-mola BM20, Руководство пользователя

Страница: 14 / 14

Rated Voltage
Airflow
Volume
(m
3
/hr)
Power Supply
Power
Consumption
(W)
Noise Level
(dB)A
Product
Dimensions
(L x W x H)
(mm)
Net Weight
(kg)
Treatment
System
Active Oxygen
Generator
Pre-filter
NCCO Reactor
Sterilization
Remove dust and hair
Remove odour and decompose harmful
pollutants such as formaldehyde and VOCs.
HEPA Filter
Remove dust, hair and airborne particles such as
allergens and pollen, bacteria, viruses and fungus.
4
5
6
50
58
Lowest
Medium
Highest
Medium
Highest
Mode
Mode
Mode
202.3（L）x 119（W）x 327.4（H）
2.1
DC12V-1.5A
Medium
Highest
33.5
37.2
12 11
Problems Solutions
The device does not operate.
Check if the device connects to the power supply.
Turn on the device.
The device does not operate and
making a “DiDi DiDi” warning
alarm .
Check if the filters install correctly. Reinstall all
filters.
The device makes an abnormal
noise.
The device produces a burnt
smell or smoke.
Possible malfunction. Call the customer service center or
contact a qualified agent.
Make sure the air inlet and outlet are not blocked.
Remove all objects that block the air inlet and outlet.
Turn off the device and disconnect it from the power
supply immediately. Call the customer service center or
contact a qualified agent.
The air quality does not improve
despite operating for a long time.
The filters may require cleaning or replacement.
It will take a longer time for the air quality to improve when
using this product in a very polluted environment.
Recommended to use higher fan speed or allow it to run
longer if necessary.
The airflow that comes
out of the air outlet is
significantly weaker than
before.
Check if the packing material is removed from the
filters.
Check if the packing material is removed from the
filters.
The filters may require cleaning or replacement.
Clean or replace the filter(s). (See "Filter cleaning
and maintenance" )
Other Information
Trouble Shooting
Other Information
Product Specification