B-K lighting TENAYA2 Series, Монтаж жилья

Страница: 11 / 11

IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASE DATE
7-11-14
REFERENCE NUMBER
INS-1324.2
%ULFN\DUG'ULYH‡0DGHUD&$‡86$
‡)$;
ZZZENOLJKWLQJFRP‡LQIR#ENOLJKWLQJFRP
B-K LIGHTING
3. Place the transformer enclosure in the side
compartment. Connect the primary/input cable
from the transformer to the interior patented
HydroLock™ plate located in the housing as
shown.
*GMBNQIPMEFSIBTBOBDDFTTPSZIPMEFSTRVFF[F
the accessory holder from the sides to free it
from the lamp holder. Install MR16 lamp.
Re attach accessory holder to lamp holder.
6. To aim , loosen the Phillip screw closest to
the lamp holder being aimed, rotate and tilt
UIFMBNQIPMEFSBTSFRVJSFEUJHIUFOUPMPDLJO
position.
up to 30° of rotation
Faceplate
screw
locations
2. Place the Patented Leveling Collar on the four
adjustable posts. Each adjustable post can be
raised or lowered using a Phillips screwdriver.
Leveling collar also allows for 30° of rotation to
align faceplate screws with one another. When
collar is level, and faceplate screw holes are
aligned to final position, secure the collar with
UIFGPVSIFYOVUTQSPWJEFE
8. Install the faceplate using 3/16” Allen wrench
BOE UPSRVF UIF GBDFQMBUF TDSFXT JO B DSPTT
pattern to 25 in-lbs.
7. Before Installation of faceplate, clean solid
silicone faceplate gasket (see arrows) and collar
of debris for a proper seal.
FAILURE TO DO THIS STEP WILL CAUSE
FIXTURE TO FAIL AND VOID PRODUCT
WARRANTY.
If your Tenaya2® came with optional Internal
Cuttoff Louver, please see the accessory holder
installation instructions.
4. Connect both high temperature connectors
from the transformer enclosure to the mating
connectors located on the bottom of the optical
chamber. Install the brass insert at the end of
the transformer enclosure umbilical into the
receptacle located on the bottom of the optical
chamber. Thread the brass retaining ring onto
the brass receptacle located on the bottom of
the optical chamber.
FAILURE TO SEAT AND TIGHTEN BRASS
RETAINING RING WILL CAUSE FIXTURE TO
FAIL AND VOID WARRANTY.
TENAYA2® ICEE™ SERIES
MR16 Halogen Component Installation
Fixture Installation