b-intense MED, Инструкция по эксплуатации

Страница: 38 / 62

38 38
EN
Reduce the intensity of the back heater
immediately, if you feel burning or pain
in the radiated area.
We recommend a warm shower and a
nurturing, moisturizing lotion after the
infrared application.
General warning notices and recommandations
Make sure that liquids do not come
into contact with the heaters or with
the timber facings. Ensure that the heater is not covered and
that there are no objects placed on it.
Avoid any contact with the heater while it
is in operation and immediately afterwards.
The high surface temperature of the heater
can cause burns. Ensure that your hair does not touch
the heater while it is in operation.
Tie your hair up to have your back
completely free.
Allow the infrared heater to cool down for
9 minutes before re-starting the cabin.
Do not use the infrared cabin within 24
hours after UV irradiation from an artifi-
cial source (e. g. solarium) or sunbathing.
Children are not allowed to play with
the device or to carry out any repairs,
cleaning or maintenance work.
Users with limited sensation of heat and
users under the effects of alcohol, drugs
or tranquilizers are not allowed to use
the cabin.
Consult your doctor on your own respon-
sibility concerning your infrared treatment
after operations, in case of illness, injuries,
pregnancy or in the case of implants (e. g.
after plastic or orthopedic surgery), also
in any case that involves a risk of overhe-
ating, such as users with cardiovascular
diseases or while taking medication.
If you experience any discomfort, stop
your infrared treatment immediately!
If overheating occurs or if you feel the
temperature is too high, you can reduce
the radiation intensity or open the door
and switch on the ventilation.
Do not stare at an infrared heater for
more than 9 minutes. We recommend
safety glasses for sensible eyes (at least
protection level 4-4 by EN 171).
Only exchange electrical components
with original components from the
manufacturer. All repairs must be
performed by an engineer qualified by
b-intense
® . The electrical components
must not be opened.