B.E.G. LUXOMAT RC-plus, Инструкция по эксплуатации и монтажу

Страница: 31 / 52

30 31
zone, there is a delaytime of 9 sec. in which no
motion is detected.
à
Pulse operation, chime function
Key , acknowledgement!
Perform movement test. Light goes on for 1 sec.
and off for 9 sec. A movement can only turn on
the light again after this 9 sec. has elapsed.
à
Turn off LED: Key
LED
, acknowledgement!
The LED no longer reacts to movement.
à
Switch off PIR: Key
PIR
, acknowledgement!
The 360° creep-under protection no longer reacts.
In order to ensure that this function is deactivated,
cover the 4 frontal planes with the clips. For faster
results, simply stick with insulating tape.
à
Set test operation: Key
TEST
, acknowledgement!
Perform movement test. The LUXOMAT
®
switches
on the light for 1 sec. and then does not react for
2 sec. Next movement test, 1 sec. light on, 2 sec.
light off, etc.
à
Set party function: Key , acknowledgement!
The constant light is turned on regardless of the
setting of the light sensor and regardless of whether
movement was detected. The light can be switched
off by pressing If this button is not pressed, the
light turns off automatically after a period of 12
hours.
à
The key turns the light off again. There is than
a 9 sec. period before activation.
Example 2:
Setting a time and light sensor value,
(LUXOMAT
®
RC-plus “opened” )
Putting into operation , see example 1,
à
Wait 1 min. self test time, “open” RC-plus, key
à
Set time to 12 min.: Key
12
min
, acknowledgement!
Check whether constant light is turned on via the
movement test. Should there be no reaction
à
Read in current light value. Key ,
acknowledgement!
A movement now causes the light to turn on.
Light value max. 2500 lux, limited internally!
à
Enter light sensor value: Experience has shown
that the unit is usually installed and the work
completed during daylight hours with the result
that it is difficult to preset a suitable value in the
traditional manner using the adjustable knob.
E.g. selection of one of the 4 fixed light sensor
values, set 25 lux: Key , acknowledgement!
The LUXOMAT
®
RC-plus will now switch on in
advanced dusk.
à
Lock LUXOMAT
®
RC-plus, key , acknowledge-
ment!
Should the light sensor value set not suit the
customer this can be changed as follows:
à
Open LUXOMAT
®
RC-plus, key ,
acknowledgement!
à
Read in current light sensor value, key ,
acknowledgement!
à
Lock LUXOMAT
®
RC-plus, key ,
acknowledgement
This individually sets the dusk value which the
LUXOMAT
®
is to turn on in accordance with the
customer’s wishes.
Example 3:
LUXOMAT
®
RC-plus ”locked”
Only the test and constant light functions can be
switched on in the “locked“ state.
à
Turn on test operation: key
TEST
, acknowledge-
ment!
Regardless of the preset light sensor value, every
movement triggers a reaction.
à
Leave test operation: key
RESET
, acknowledgement!
The previously set time and light sensor values
apply (see also
RESET
)
à
Setting the party function , acknowledgement!
Constant light is on; can be switched off again
as required at any time using the light off key
Press key for light off.
Example 4:
Adjustment of 16 min./25 lux and additional
Vacation/Comfort- and Party function
Putting into operation,
see example 1
à
Wait 1 min. self test time, “unlock” with key
(
à
optional RESET : key
RESET
, acknowledgement!)
à
Enter 16 min. time: key
16
min
, acknowledgement!
à
Enter 25 lux: key , acknowledgement!
à
Enter Alarm:, key
Alarm
, acknowledgement!
à
Enter Vacation/Comfort: key Co , acknowledge-
ment!
à
Lock LUXOMAT
®
RC-plus, key , akcnowledge-
ment!
à
Enter Party program: key , acknowlegement,
Light ON!