background image

OPERATION MANUAL

Technical changes reserved
0141 0315-150         29.06.2016

Controller N321

Foreword

Dear customer, 

We thank you for having purchased the controller N321 and we are very glad that you decided to buy a product of

B+B Thermo-Technik GmbH

. We hope this product will fully satisfy you and will assist you effectively in your work.

This Device has been developed to be technically highly up-to-date and has been designed in accordance with the regnant European and 

German national directives and rules. For a proper and effective usage of the product the customer shall observe the following Operating 

Instructions. In the case that against one’s expectations any trouble occurs which you can not resolve yourself, please contact our service 

centers or our authorized dealer. We will provide you rapid and competent help to minimize the risk of long time outfalls.

The following operating Instruction is an indispensable part of this Product. It contains important advices for the starting up and further use of 

the device.

General information

This Operation Manual is intended to serve as an aid in the proper setup, installation and operating of the B+B product. 

All essential details of the equipment and all actions required on the part are clearly presented and explained. We thus ask that you read 

this manual carefully before proceeding to work with the equipment. Keep this manual available for ready reference in a convenient and 

conspicuous location near the equipment.

Symbols employed

Sign

Meaning

Notice

 

 

Advice

It is necessary to read the following advices before using the product. The used symbols in the manual 

acts first of all as eye catcher for security risks. The symbols do not replace the security advices. The text 

must be read completely.

 

Necessarily to 

observe

This symbol designates important advices and tips which are necessary for the success of a procedure. 

They have to be followed in order to get good results.

Warning signs 

Sign

Meaning

This symbol advises the user of danger for persons, material or environment. The text gives information

that must be necessarily followed to avoid any risks

 

Caution against hot surfaces (BGV A8, GUV-V A8/W26) and hot liquids or substances

 

Caution against liquids and hot substances

 

Caution against dangerous explosive substances (BGV A8, GUV-V A8/W02)

 

 

Caution against moving maschines (W29) 

Caution against moving parts

 

Caution against electromagnetic fields (BGV A8, GUV-V A8/W12)

 

Caution against severe cold (BGV A8, GUV-V A8/W17ice

B+B Thermo-Technik GmbH | Heinrich-Hertz-Str. 4 | D-78166 Donaueschingen 

Fon +49 771 83160 | Fax +49 771 831650 | [email protected] | bb-sensors.com

2 / 9

Содержание N321










Отзывы: