The
AZZA
P4X2-A MAINBOARD SERIES
Page 25
2.8.3. JP4: CPU Clock (optional)
Type:
2 pin
Default:
Open
This allows you to select the speed of your CPU. If you are using a 400 MHz FSB CPU (with
a 100 MHz) on your mainboard then you need to SHORT JP 4. If you are using a 533 MHz
FSB CPU (with a 133 MHz) you need to OPEN JP4.
2.8.4. JP12: STR Mode (optional)
Type:
2 pin
Default:
Open
When the system is in suspend mode the Suspend to RAM allows the system/application
state to be saved in the RAM. oWhen this mode is activated very little power is used by the
system. It is almost as if the system has been turned off completely. When a user reactivates
the system it will rapidly “wake up” to the previous state and the long boot phase can be
avoided.
2.8.5. JP13: Clear CMOS
Type:
3 pin
Default:
Pin 1 and Pin 2 Short
If you have made an improper setting in the BIOS setup and your computer is not function-
ing, or if you have forgotten your password, you can use this jumper, JP13, to clear the
CMOS and to reconfigure your system.
To clear the CMOS, please follow these instructions:
1.
Turn the system power “OFF” and unplug your computer.
2.
Insert the jumper cap on Pin 2 and Pin 3 for 3 ~ 5 seconds.
3.
Pull out the jumper cap and replace it on Pin 1 and Pin 2.
4. Turn your PC on and run the BIOS setup program
2.8.6. JP14: Selects English or Chinese for Voice Warning Message
(optional for P4X2-AS, P4X2-AV AND P4X2-AC)
Type:
2 pin
Default:
Open
This motherboard has the ability to give voice warning messages during hardware debug-
ging. If you leave it open (the default setting) you will receive English messages. If you short
the jumper you will receive Chinese messages.
Hard
ware
In
sta
llat
ion
Hardware Installation
