20
Top View
of the
Front
Audio
Connector
PIN 2: MIC-IN
PIN 1: Ground
PIN 4: No Con-
nection
PIN 3:
MIC_RCH
PIN 6: LINE-IN
Left
PIN 5: LINE-IN
Right
PIN 8: EAR-
PHONE Left
PIN 7: Ground
PIN 10: Ground
PIN 9: Ear-
phones Right
2.
2.
2.
5
5
5
.
.
.
System Panel Buttons and LED Connectors
System Panel Buttons and LED Connectors
System Panel Buttons and LED Connectors
The following System Panel Buttons and LED
Connectors can be found at the front of the
mainboard on the left hand side.
PW
= Power On/Off and
Suspend Switch Connector
TL
= Turbo Light LED
HL
= HDD LED Connector
RS
= Reset Button LED Connector
No Connection
TL:
+5V DC Pull Up Ground
HL:
+5V DC Pull Up
RS:
Reset Control
PW:
+5V DC Pull Up
Ground
Ground
Ground
Top View of the System
Panel and LED Connectors
2.5.1 PW: Power On / Off and External Suspend Switch Connector
Note: This connector can only be used with an ATX power supply
Hard
ware
In
sta
llat
ion
The Power On/Off connector has two functions. It can be the Power Switch or
Suspend Switch of your PC system. You can either choose “
Delay 4 Sec or In-
stant OFF
” (Please refer to the Award BIOS setup instructions in Chapter 3).
Option 1:
If you choose “
Delay 4 Sec.
” In the BIOS CMOS Setup, the function
of “PW” will be:
A. When the system power is "OFF", press this switch, the system will
power on.
B. When system power is "ON”, you can select two different modes: -
Mode 1:
Press and hold the Power ON button for less than 4 seconds and then
release it. The system will be turned into Suspend mode (turned into the GREEN
mode) When the system is in the Suspend mode:-
!""
Press the Power on button (less than 4 seconds), the system will return to
Full-ON mode.
!""
Press and hold the Power On Button for more than 4 seconds, the system
will be powered off.
Hardware Installation
Hardware Installation
PIN 1
PIN 2
