39
Video Off In Suspend
Video Off In Suspend
Video Off In Suspend
When you select Yes, the screen display will be disabled ( no display on the
screen) when the PC system is in the suspend mode.
Suspend Type
Suspend Type
Suspend Type
This field allows to select the suspend type, you can choose the CPU Stop Grand
Suspend or the PwrOn Suspend.
Modem Use IRQ (optional)
Modem Use IRQ (optional)
Modem Use IRQ (optional)
This mainboard has the ACPI feature designed on the board and it will “wakeup”
automatically when it detects incoming modem Ring-in signal (only available with
external modem connected to your PC system. You need to input the desire IRQ
value of the com port used.
V/H SYNC+Blank
This selection will cause the system to turn off the
vertical and horizontal synchronization ports and write
blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
Suspend Mode
Suspend Mode
Suspend Mode
This field allows you to choose the time interval which PC system will turn into
suspend mode.
HDD Power Down
HDD Power Down
HDD Power Down
When enabled and after the set time of system inactivity, the hard disk drive will
be powered down while all other devices remain active.
Soft
Soft
Soft
-
-
-
Off by PWR
Off by PWR
Off by PWR
-
-
-
BTTN
BTTN
BTTN
This field allows user to define the feature of the “PW” connector (it is used to
connect the power button ). The setting can be either “Delay 4 Sec.” or “Instant-
Off”. Please refer to page 21 for details of the different function descriptions
Wake
Wake
Wake
-
-
-
Up by PCI card
Up by PCI card
Up by PCI card
When “Enabled”, any signal by the PCI devices will wake up the system in standby
mode.
COM 1 uses IRQ4, and COM 2 uses IRQ3.
BI
OS
BI
OS
BI
OS
BI
OS
BIOS Setup
BIOS Setup
