40
Power On by Ring / LAN
Power On by Ring / LAN
Power On by Ring / LAN
When “Enabled”, you can use the Modem Ring signal or the LAN wake up signal
to power on the PC system.
CPU Thermal
CPU Thermal
CPU Thermal
-
-
-
Throttling
Throttling
Throttling
This field allows you the select the CPU throttle rate. When CPU temperature is
too high, the onboard hardware monitoring will tell the CPU to reduce to the
throttling speed to protect the CPU. The choice available for the CPU throttling
rate are: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5%. This function will
not work when the “CPU Warning Temperature” is Disabled.
Resume by Alarm
Resume by Alarm
Resume by Alarm
When "Enabled”, you can use the following two selection fields - "Date (of Month)
Alarm”and“Time (hh:mm:ss) Alarm”to select the alarm date and time. You can
use these two fields to set the date and time which you want to resume the
system from Sleep or Suspend mode. The “Time” must be set in a 24-hour
format.
**** Reload Global Timer Events ****
**** Reload Global Timer Events ****
**** Reload Global Timer Events ****
When "Enabled", an event occurring on each device listed below restarts the
global time for Standby mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ [A-D]
PNP OS Installed
PNP OS Installed
PNP OS Installed
If your OS like windows 98 supports PNP, then select “Yes”.
Reset Configuration Data
Reset Configuration Data
Reset Configuration Data
This field should leave as Disabled. If you have installed a new add-on card and
the system reconfiguration has caused serious conflict that the operating system
can not boot, then you should Select Enabled in order to reset Extended System
Configuration Data (ESCD).
BI
OS
BI
OS
BI
OS
BI
OS
3.8
3.8
3.8
PNP/PCI CONFIGURATION
PNP/PCI CONFIGURATION
PNP/PCI CONFIGURATION
(The
PNP/PCI Configuration
Menu is on the following page)
BIOS Setup
BIOS Setup
