35
A
A
A
C97 Audio
C97 Audio
C97 Audio
There is the Audio interface built in the system chipset. You can use this field to
configure the onboard Audio interface or disable the audio interface.
AC97 Modem
AC97 Modem
AC97 Modem
Set this field to “Auto” if you installed a CNR Modem card.
IDE HDD Block Mode
IDE HDD Block Mode
IDE HDD Block Mode
This selection allows your hard disk controller to select the block mode to transfer
data to and from your hard disk drive (HDD).
POWER ON Function
POWER ON Function
POWER ON Function
The Power ON function allows you to select different ways to power on your PC
system.
KB Power ON Password
KB Power ON Password
KB Power ON Password
When you select KB Power ON Password to power ON the PC system in the
previous selection field, you may enter your personal password in this field. When
finished, you may use the password to power on your PC system. ( if you
forgotten the password, you can refer to page 28 for details to clear the
password)
Hot Key Power ON
Hot Key Power ON
Hot Key Power ON
When you select Hot Key Power ON to power ON the PC system in the previous
selection field, you may select a set of "Hot Key" in this field. When finished, you
may use the combination of hot key to power on your PC system.
Onboard FDC Controller
Onboard FDC Controller
Onboard FDC Controller
This should be enabled if your system has a floppy disk drive (FDD) installed on
the system board and you wish to use it. If you add a higher performance
controller, you should disable this feature.
Onboard Serial Port 1/Port 2
Onboard Serial Port 1/Port 2
Onboard Serial Port 1/Port 2
This item allows you to determine which I/O address you want the onboard serial
port 1 and 2 controller to access.
Enabled
IDE controller uses block mode.
Disabled
IDE controller uses standard mode.
BI
OS
BI
OS
BI
OS
BI
OS
BIOS Setup
BIOS Setup
