AZZA 6IFB, Руководство по эксплуатации

Страница: 30 / 35

PT-6IFB
SYSTEM BOARD
AWARD BIOS SETUP
I.
12
stability. If CMOS RAM is corrupted, the SETUP DEFAULTS settings are loaded
automatically.
A. SUPERVISOR PASSWORD / USER PASSWORD
Type the Password and press "Enter", then repeat. Enters up to eight alphanumeric
characters. By pressing "Enter" key twice, without any alphanumeric character enters,
the PASSWORD will be disabled.
A. IDE HDD AUTO DETECTION
By pressing "Enter" key, while "IDE HDD AUTO DETECTION" is highlighted causes
the system to attempt to detect the type of hard disk. If successful, then presses "Y" (or
1, 2, ...) and "Enter" key, it fills in the remaining fields on this menu and the correlated
fields in the STANDARD CMOS SETUP menu.
A. HDD LOW LEVEL FORMAT
This option provides an utility program for IDE HDD Low Level Format. Performing
the Hard Disk Format will destroy any data on the Hard Disk. Back up the Hard Disk(s)
before actually performing of these routines.
Note : These routines are not valid for a SCSI Disk Drive.
A. SAVE & EXIT SETUP
This option saves all setup values to CMOS RAM & EXIT SETUP routine, by moving
the cursor to "SAVE & EXIT SETUP" and pressing "Enter" key, then types "Y" and
"Enter" key, the values will be saved, the setup program will be terminated and the
system will be reboot.
A. EXIT WITHOUT SAVING
This option exites setup routine without saving any changed values to CMOS RAM, by
moving the cursor to "EXIT WITHOUT SAVING" and pressing "Enter" key, then types
"Y" and "Enter" key, the setup program will be terminated and the system will be
reboot.