AZZA 6IFB, Руководство по эксплуатации

Страница: 29 / 35

PT-6IFB
SYSTEM BOARD
AWARD BIOS SETUP
I.
11
Onboard Serial Port 1 : 3F8/IRQ4
Onboard Serial Port 2 : 2F8/IRQ3
Onboard IR Controller : Disabled
ESC : Quit
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
Fig. 5-8 INTEGRATED PERIPHERALS setup screen.
WARNING : The INTEGRATED PERIPHERALS in this screen are provided so that
technical professionals can modify the Chipset to suit their requirement.
If you are not a technical engineer, do not use this program !
IDE HDD Block Mode :
This feature enhances hard disk performance, making multi-sector transfers instead of
one sector per transfer. Most IDE drives, except the very early designs can use this
feature. Default is "Enabled".
Onboard IR Controller :
This field controls IR port functions, if “Enabled” you could select the following four
setup items, otherwise, the following four items will disappear.
IR Address select : The default value is “2E8H”
IR Mode : The default value is “IrDA”
IR Transmittion delay : The default value is “Enabled”
IR IRQ select : The default value is “IRQ10”
Parallel Port Mode :
This field determines the onboard parallel port (CN 5) function mode. Supports either
SPP, EPP, ECP or ECP+EPP.
A. LOAD SETUP DEFAULTS
This option loads the SETUP default values from BIOS default table. By pressing
"Enter" key, while "LOAD SETUP DEFAULTS" is highlighted, then presses "Y" and
"Enter" key. the SETUP default values will be loaded. The SETUP default settings are
the best-case values that should optimize system performance and increase system