AZZA 6IFB, Руководство по эксплуатации

Страница: 3 / 35

PT-6IFB
SYSTEM BOARD
ii
TRADEMARKS
All trademarks used in this manual are the property of their respective owners.
NOTE
The "LOAD SETUP DEFAULTS" function loads the default settings directly from
BIOS default table, these default settings are the best-case values that should optimize
system performance and increase system stability . This function will be necessary
when you accept this system board, or the system CMOS data is corrupted.
By pressing "Enter" key, while "LOAD SETUP DEFAULTS" is highlighted, then
presses "Y" and "Enter" key. the SETUP default values will be loaded. (Please refer to
the Chapter 5 AWARD BIOS SETUP procedures in this manual.)
NOTICE
Information presented in this manual has been carefully checked for reliability;
however, no responsibility is assumed for inaccuracies. The information contained in
this manual is subject to change without notice.
WARRING !
The "Static Electricity" might cause damage to the components on the system board, for
this reason, please eliminate all static electricity on your body before you touch this
system board.