VIA 82C694 ATX Mainboard
ii
SOMETHING IMPORTANT !
¶
TRADEMARKS
All trademarks used in this manual are the property of their respective owners.
¶
LOAD SETUP DEFAULTS
“LOAD SETUP DEFAULTS” is the function which will have the BIOS default
settings loaded into the CMOS memory, these default settings are the best-case
values which will optimize system performance and increase system stability This
function will be necessitated when you receive this mainboard, or when the system
CMOS data is corrupted. Please refer to the Section 4.12 for the procedures.
¶
DISCHARAGE CMOS DATA
Whenever you want to discharge the CMOS data or open the system chassis to add
or remove any component from the mainboard, make sure to disconnect the AC
power first because there is always the 5V standby voltage connected to the ATX
form-factor mainboard. Without disconnecting the AC power connector from the PC
system, the mainboard can be damaged by any improper action .
¶
WAKE ON LAN
In order to support the Wake On LAN feature, the system requires a special SPS
(Switching Power Supply), Such power supply must be able to provide at least 700
mA of driving capability on the “5V standby” voltage. Please refer to the Section 3.3
for pin assignment.
¶
WARNING !
The "Static Electricity" may cause damage to the components on the mainboard, In
order to avoid the damage to the mainboard accidentally, please discharge all static
electricity from your body before touching this mainboard.
¶
NOTICE
Information presented in this manual has been carefully checked for reliability;
however, no responsibility is assumed for inaccuracies. The information contained in
this manual is subject to change without notice.
IMPORTANT NOTICE !!!
This mainboard provides the flexible design that allows you to fine tune
the CPU core voltage and front side bus frequency. However, we do not
give guarantee on over clocking because there are many factors which
will give different result. Please consult with an experienced technician
before you start the CPU over clocking.
