VIA 82C694 ATX Mainboard
HARDWARE SETUP
3-1
3.
HARDWARE SETUP
Before you can start to install this mainboard, some hardware setting is required
so that it will work perfectly. To configure the mainboard is a simple task, only a
few jumpers, connectors, cables and sockets need to be selected and configured.
This section will show all the connectors and jumpers on the mainboard.
3.1
INSTALLATION OF CPU
The connector on this mainboard where we can install the CPU is the socket 370
as shown in the following picture. The front side bus (FSB) speed of this
mainboard will support from 66MHz, 100MHz and up to 133 MHz. So you may
feel free to install the most updated socket type Pentium ™ !!! or Celeron™
processor onto this mainboard.
+
1
2
3
4
A
B
C
SOCKET 370
Be sure to remove the power cable from the PC system
when installing CPU or any other components
.
