Aztech VDSL5040GRV(AC), Руководство пользователя

Страница: 21 / 44

User Manual
Page 21 of 44
configured in this section. You can change the preset wireless network name
(SSID). Click the Apply button to save the changes you have made.
The following table describes the parameters of this page.
 Basic Configuration 5GHz
Choose Basic Setup > Wireless > Basic Configuration 5GHz. The WLAN page
that is displayed contains Choose SSID, Enable SSID, Enable Isolation, Hide
SSID, BSSID and Choose Country. Please refer to the parameters above. You
can change the preset wireless network name (SSID). Click the Apply button
to save the changes. After that, all your wireless devices must use the new
SSID to connect to the modem router.
FIELD DESCRIPTION
Choose SSID
In 2.4GHz, you can choose from SSID 1 to SSID 4
In 5GHz, you can choose from SSID 5 to SSID 8
Enable SSID
Enable the 2.4 GHz Wireless Network. If you don’t want to use the wireless
function, just deselect the box.
Enable
Isolation
Every SSID is independent, they cannot access each other.
Hide SSID
Select Hide SSID, and your SSID will not broadcast. Your SSID won’t display on
your wireless device when you scan for local wireless network list and you
need to manually join the network.
SSID
Service Set Identifier used to identify your 802.11 wireless LAN should be
specified while operating, All the client devices within the range will receive
broadcast messages from the access point advertising this SSID.