IP 200 User Manual
Page 43 of 72
Registration Status:
This status shows you if the IP Phone is registered to the server or
not.
Current Voice Call Status:
This status shows you the current voice call status.
Submit:
Applies all the settings you did in this page.
Save Settings:
Click this link to go to the
Save Settings / Reboot
page. On the
Save
Settings / Reboot
page, click
Save & Reboot
to permanently save the settings to
system flash memory and to reinitialize the system to the new settings.
Service Provider Configuration
This page sets the configuration related to the SIP service provider.
Figure 22
Service Provider Configuration page
Service Provider List:
Enter the name of the service provider to be configured. When
a service provider is selected from this drop-down list, the respective parameters
are automatically displayed. A DEFAULT service provider is provided with a default
set of parameters. This can be edited. New service providers can be manually
defined and added. An existing service provider can be edited or deleted.
New Service Provider:
Enter the name of the service provider to be added if the
Service Provider List
field is blank, or a new string to rename the service provider
displayed in the
Service Provider List
field.
Registration Interval (in secs):
Enter the re-registration interval in seconds. The range
is 0 to 2147483347 seconds. The default is 60 seconds.
Authentication Method:
Select the authentication method. Only MD5 is supported.
•
AUTH_NONE:
Disable any authentication method.
•
AUTH_MD5:
Use MD5 authentication method.
Registrar Address:
Enter the IP address or Domain Name of the registrar with which
the ATA must register in order to receive or send calls.
Содержание IP 200
Страница 12: ...IP 200 User Manual Page 12 of 72...
