IP 200 User Manual
Page 23 of 72
Save & Reset
This is to confirm all the setting above for the phone:
1. Under Set mode, use the scroll key and
Select
soft key to enter
Save & Reset
;
2. Press the scroll key then
Select
soft key to select
Yes / No
; When
Yes
is selected, key in the super user password, and press
OK
soft
key to resume factory default setting. If your password remains the
default setting, the system will resume factory default setting
without asking password.
Software Version
•
Under Set mode, use the scroll key and
Select
soft key to enter
SW
Version
to view the software version.
4.2 Configuring via Web Interface
Registration Procedure
For non-DHCP clients, please refer to
Configuring your Computer
.
The web interface allows you to register the IP200 with Setup pages.
And if you want to activate more functions, you are recommended
to configure Basic and Advanced phone settings, refer to
Understanding Web User Interface
.
Step1.
To access the web interface
1. Open your browser.
2. If your PC is connected to LAN interface, enter
http://10.0.0.99/
in the address bar and press
ENTER
to access the IP Phone
Administration web interface using the account: username:
admin
and password:
epicrouter
Содержание IP 200
Страница 12: ...IP 200 User Manual Page 12 of 72...
