INSTALLATION AND START-UP
3.3.1
Pre-condition checks
Check that the installation requirements described in point 3.1 are met.
3.3.2
Removing the packaging from the equipment
Remove the packaging from the machine and its accessories.
Remove the protective materials and save the accessories and documents for subsequent
steps.
Dispose of the packaging materials in accordance with the local waste recycling regulations.
Remove the 4 M8 hex bolts anchoring the machine to the wood pallet.
Mount the levelling legs in the positions of the bolts that were removed.
3.3.3
Placing the machine on the support surface
Place the machine on the support surface with the help of another person.
Place the refrigerator on the surface, remove the container or any other
elements stored inside.
Establish the final location of the refrigerator (left, right or under the counter). Fit the
fastening flange onto the refrigerator, turning it over on one of its sides, according to the
assembly side. The interface is not assembled when it is mounted under the counter.
With the machine on the pallet, slightly slide if off with the help
of another person until the leg housings are accessed, through
the holes existing between the assembly planks.
A fixed nº13 wrench is needed.
