Azkoyen Hopper U 3030 Series, Техническое руководство

Страница: 9 / 25

10095 UK 09 - 2004
Technical Information: HOPPER U 8
emptying the hopper of coins.
9. Extractor disk
There are three different coin extractor disks . The three accept the same thickness coins which
are between 1.2 mm minimum and 3.5 mm maximum.
Disk with 8 ridges and a red pivot : for coins with diameters between 18 and 30 mm.
This disk can reach a payout speed of 5.3 coins/second.
Disk with 12 ridges and a yellow pivot : for coins with diameters between 12 and 20
mm. This disk can reach a payout speed of 8 coins/second.
Disk with 7 ridges and a black pivot : for coins with diameters between 20 and 32
mm. This disk can reach a payout speed of 4.6 coins/second.
10. Drive motor for the extractor disk
This motor spins the disk so the coin can be extracted from the hopper. Its electrical
characteristics are as follows:
Current draw
12 Vdc 24 Vdc
Rest 75 mA 75 mA
Start up 3 A 2.5 A
Spinning 450 mA 310 mA
11. Base
This element is a hopper accessory that is used to join the hopper to the machine in which it is
installed. It has all the necessary holes to fix it to the machine and clips to hold the hopper for
fast assembly/disassembly.
12. Infrared photocells for counting coins
On leaving the hopper the coins cut an infrared beam generated by these photocells. The pulse
is considered correct when the duration is 18 milliseconds minimum. If the exit pulse is above
one second it is considered an error and the hopper will be put in out of order state.
13. Disk Support
This element houses the coin extraction system, PCB and the coin bay.
14. Housing
This element covers and protects all the different elements that are installed in the front part of
the hopper.