AzenX AZ-SBC98, Руководство по установке

Страница: 2 / 9

1
Introduction of SATA SUB RAID V3
SUB RAID V3 is the RAID system, which meets SATA transfer norms and standards. It
provides schools, public institutes, governments, monitoring severs or personal-use
computers the High-speed Backup. SATA SUB RAID V3 provides all PC users the highest
performance with the lowest cost.
Functions and Features of SATA SUB RAID V3
„ Data Backup
：
Support SATA (SATA1
／
SATA2) to SATA RAID Level 1 data backup
function. The backup is as mirroring technique from one hard disk to another one
automatically, including operation system, and all data in the hard disk.
„ Auto-rebuild
：
Under the system execution, if one hard disk is replaced, SATA RAID
V3 will re-build data to the new hard disk automatically.
„ Hardware Design
：
Built-in and independent MRS Chipset V3, CPU, RAM and
ROM.
„ Firmware Upgradable
：
Built-in Flash BIOS provides easy firmware upgrading.
„ Hot Swappable
：
When one disk crashes, SATA SUB RAID V3 allows removing one
hard disk directly without power off. Meanwhile, the system is also transferring to
another normal hard disk and works as usual.
„ Easy maintenance
：
Friendly user interface allow users eliminate common errors, with
reducing MIS staff’s loading, and costs of maintaining system significantly.
„ Fault Alert
：
The front LCD panel indicates the status of hard disk, and buzzer alerts
when error.
„
Plug and Play
：
There is no need to install any software, or any driver of devices.
„ Host Compatibility
：
Support IBM compatible PCs, and is compatible with major
brands’ mainboards and chipsets.
„ Hard Disk Compatibility
：
Support all major brands’ SATA hard disk (SATA1
／
SATA2)
„ System Monitoring
：
The LCD indicates and monitors the status of system (HDD1
／
HDD2)
„ High Performance
：
SATA SUB RAID V3 applies MRS unique High-speed backup
technology without occupying system resources.
„ Supporting Multi-booting System
：
Such as Commander, IBM OS
／
2 Boot Manager,
and etc.
„ Backup Pause
：
When the loading of hard disk is busy, you can select to pause backup
(switch is ON status) to increase hard disk capacity. When the hard disk restore to the
normal working status, you can select Restore Backup (Switch is OFF status) and the
backup will start from the percentage recorded already continuously. Backup pause